In 2001 we invested £1.5m in a Red Bud multi-strand de-coiling & blanking line. This allows us to produce highly accurate Steel Sheets and Blanks. We are able to cut up to 3.5mm thick in Mild Steel and 1.5mm thick in Stainless Steel.

We process Steel for some of the world’s largest producers to very tight tolerances suitable for end users such as Jaguar and Land Rover.

Our customers require panel-flat sheets every time. To ensure that we can deliver, we have invested in one of the UK’s best levelling systems. With 128 back up rolls we can manipulate the steel in eight locations to ensure that every sheet is panel flat.

Multi-Strand Blanking

Multi-Strand Blanking allows us to cut blanks from Steel coil in both directions. This can save time and money as material usually has to be sheared after it has been de-coiled. The number of blanks we can produce per cut is dependant on the thickness of the material.

Stainless Steel De-coiling

We can multi strand blank or de-coil various grades of Stainless steel. Due to the hardness of this material our maximum limit is 1250 x 1.5mm coil. If you have a specific enquiry, please don’t hesitate to give our sales team a call on 0121 603 4000.

In House Wood Centre

We manufacture pallets in house in our wood centre. We are able to offer bespoke pallets to your specification. Some machinery requires a specific type of pallet to support automation.

If you have your own pallets you would like to send in, we are able accommodate these too.

Give our sales team a call to find out more.

Please see the table below for our multi-strand blanking and shearing capabilities.

Thickness # Cuts Min Length Max Length Tol +/- (W) Tol +/- (L) Min Width Max Width
0.5mm 5 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
0.6mm 5 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
0.7mm 5 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
0.8mm 5 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
0.9mm 4 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
1.0mm 4 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
1.2mm 4 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
1.5mm 4 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
2.0mm 4 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
2.5mm 3 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm
3.0mm 3 200mm 4267mm 0.20mm 0.40mm 305mm 1905mm

If you have any questions or enquiries, please get in touch by calling us on 0121 603 4000 or emailing sales@cliftonsteel.co.uk